folder_open Conversion Optimization

New FCC opt-out rules for contractor lead texts

Martin Marinov Martin Marinov
10 min read
Topics tcpatext-message-compliancelead-trackingcrm-automationcontractors

The FCC published a final rule on October 26, 2026 that changes how businesses must handle opt-outs for calls and text messages, and it takes effect on November 25, 2026. If your business auto-texts new leads, sends quotes by text or sends appointment reminders, the new TCPA opt-out rules apply to you.

The change is practical. You can name one official way for people to opt out, but only if every text says what it is. You must also honor opt-outs quickly, and a STOP reply may cancel more than you expect. If your CRM treats every text the same way, a STOP reply could cut off the wrong messages, or fail to cut off the right ones.

This post covers what changed, how to sort your texts into two groups, and how to set up your CRM before the deadline. We are a marketing and tracking agency, not a law firm. Use this to get organized, then have your attorney review your final wording.

What the new TCPA opt out rules change on November 25, 2026

Here is what the FCC rule says, based on the Federal Register notice on consumer control of robocalls and texts. It was published on October 26, 2026 and takes effect on November 25, 2026.

It covers calls and texts. Text messages are included, so your lead follow-up texts, quote texts and reminder texts are all in scope.

You can choose one opt-out method. A business can designate an exclusive way for people to revoke consent. One example is a text reply using standard words like stop, quit, end, revoke, opt out, cancel or unsubscribe. The condition is that the method must be clearly disclosed in each message. If a text doesn’t show the opt-out method, you can’t rely on it.

Opt-outs depend on the type of message. This is the core of the FCC’s new revocation-of-consent rule:

  • If someone opts out of an informational message, the opt-out may apply only to that category of messages.
  • If someone opts out of an advertising or telemarketing message, the opt-out applies to all future marketing from you.

There is a deadline. You must honor an opt-out within a reasonable time, and no later than ten business days.

One confirmation text is allowed. A confirmation text with no marketing content, sent within five minutes of the opt-out, is presumed allowed. “You’re unsubscribed, you won’t get more messages from us” is fine for a full opt-out. If you scope an informational STOP to that category only, the confirmation should describe exactly what the person was opted out of, for example: “You’re unsubscribed from appointment reminders. Reply HELP for help.” “You’re unsubscribed, but here’s a fall tune-up deal” is not allowed.

Sort your lead texts into informational and marketing

You can’t set up opt-outs correctly until you know which group each text belongs to. Most contractors have never sorted their texts this way. Their CRM has a pile of automations that someone set up over time.

Start by listing every automated text your business sends. Check your CRM, your scheduling tool, your call tracking platform and any review request tool. Then sort each one.

Texts that are usually informational

These texts give a customer information about a job they already asked for:

  • “We got your request. A tech will call you within the hour.”
  • “Your appointment is confirmed for Tuesday morning.”
  • “Your technician is on the way.”
  • “Here is the quote you asked for. Reply with any questions.”

Appointment reminder texts under the TCPA usually belong here. They are about a service the customer already booked, and they don’t try to sell anything new.

Texts that are marketing

These texts try to get someone to buy something:

  • “Spring AC tune-up special, book this week.”
  • “Still thinking about that new roof? Financing is available.”
  • “Refer a neighbor and get a discount on your next service.”
  • Seasonal check-in blasts to past customers.

The gray zone

Some texts mix both types, and this is where contractors get into trouble. Quote follow-ups are the common case. Say a homeowner gets an estimate for a water heater on Monday. If your Thursday follow-up says “Your quote is still valid, reply with questions,” it is close to informational. If it says “Book by Friday and we’ll knock something off,” it is selling.

Our rule for clients is simple: if you’re unsure, treat the text as marketing. A text that includes a promotion, discount, upsell or new offer goes in the marketing group, even if it also mentions an existing job. You can also split a mixed text into two messages: a clean informational one and a separate marketing one.

Pick one opt-out method and put it in every text

The new rule lets you choose an exclusive opt-out method, but only if each message discloses it. For most trade businesses, the simplest choice is a reply keyword.

Choose reply words and keep the list wide. Your system should treat stop, quit, end, revoke, opt out, cancel and unsubscribe as opt-outs. Customers don’t read instructions. They type whatever word comes to mind, often in capitals and sometimes with extra words around it. Ask your texting tool to match these words even when there’s other text in the reply.

Add the disclosure to every template. A short line at the end works, for example: “Reply STOP to opt out.” Put it on every automated text, including the first “we got your request” message and every reminder. If one template is missing the line, you lose the protection of the exclusive method for that message.

Watch for manual texts. Office staff and techs often text customers from the CRM inbox by hand. Ask your team to add the opt-out line to manual texts as well, or set your system to add it automatically.

Decide what a STOP on an informational text does. Under the rule, an opt-out from an informational text may apply only to that category. You need to decide whether a STOP on an appointment reminder ends only reminders, or ends reminders and marketing. Many owners choose to end everything on any STOP, because it’s easier to run and less likely to upset a customer. Choose one approach, write it down, and set it up the same way across all your tools.

Handling STOP replies well is mostly about consistency. One method, disclosed every time, handled the same way in every system.

Set up your CRM so STOP ends the right messages

This is the work that needs to be done before November 25, 2026. Give this list to whoever manages your CRM, texting tool or website forms.

  1. Export every automation that sends a text. Include workflows, drip sequences, reminder rules and review requests. Note what triggers each one and which phone number it sends from.
  2. Tag each automation as informational or marketing. Use the sorting rules above. Put every gray-zone text in marketing, or split it into two messages.
  3. Create two contact-level fields or tags. For example, “Opted out - informational” and “Opted out - marketing.” Avoid a single “do not contact” flag if you want STOP to work differently by category.
  4. Build the STOP rule. When a reply matches any opt-out word, check which type of message the contact last received. A reply to a marketing text sets the marketing opt-out, which removes the contact from all marketing workflows. A reply to an informational text sets the informational opt-out, plus the marketing opt-out if that’s the policy you chose.
  5. Add a filter to every workflow. Each marketing workflow should skip contacts with the marketing opt-out. Each informational workflow should skip contacts with the informational opt-out. Test this, because many CRMs only check filters at the moment a contact enters a sequence.
  6. Send one plain confirmation text. Keep it to a confirmation with no offer, no link to a promotion and no discount, and have it go out within five minutes of the opt-out.
  7. Sync opt-outs across every tool. If you use separate tools for scheduling, call tracking and reviews, make sure an opt-out in one tool reaches the others. Use a native integration or a simple connector. Ten business days is the outer limit, and a manual weekly export is too slow to rely on.
  8. Run a live test before the deadline. Text your own business line, go through each workflow, and reply STOP to both an informational and a marketing message. Confirm the right tags are set and the right sequences stop.
  9. Keep a record. Log the date, the message the person replied to, and the action your system took. If a customer ever disputes a text, this record helps.

If your leads come from ads, check that the opt-out tag doesn’t break your reporting. We often see contractors lose track of which ad brought in a lead once that lead is marked “do not contact.” Our ads-to-CRM attribution setup keeps the lead source on the contact record after an opt-out. That way you still know which campaigns bring in booked jobs.

If any marketing texts include links, tag those links with the UTM link builder. That lets you see which texts drive visits and which mostly drive opt-outs, which tells you which ones to rewrite or drop.

Frequently asked questions

If a customer replies STOP to an appointment reminder, can I still text them the day of the job? Under the new rule, an opt-out from an informational message may apply only to that category. A STOP on a reminder can therefore cover other informational texts like day-of updates. The safe move is to stop the texts and call the customer, or confirm the details in person when you book. Ask your attorney before you keep texting someone who replied STOP.

My techs text customers from their own phones. Does that count? The rule covers texts from your business, and your CRM can’t apply opt-outs to messages sent from a tech’s personal phone. If techs text customers, either move that texting into your shared system or give them a clear rule: once a customer says stop, they don’t text that number again, and they tell the office.

Do I need to add “Reply STOP to opt out” to the auto-reply that goes out right after a form submission? Yes, if you want reply-STOP to be your exclusive opt-out method. The rule requires the method to be clearly disclosed in each message, and the first auto-reply is a message.

Is a quote follow-up text informational or marketing? It depends on the wording. A text that only confirms the quote or answers a question is closer to informational. Once it adds a discount, a deadline to book or an upsell, treat it as marketing. When you’re unsure, put it in the marketing group.

What if someone texts “please don’t text me anymore” instead of STOP? Your system may not match that phrase automatically. Set up a daily check of your inbox for replies that clearly ask to stop, and apply the opt-out by hand. The ten business day limit is a ceiling, so handle these the same day where you can.

Can my confirmation text thank them and mention our referral program? No. The confirmation that’s presumed allowed must have no marketing content. Thank them, confirm what they’re opted out of, and nothing more.

Your next step

This week, export every automated text your business sends and tag each one as informational or marketing. That one list shows you exactly what needs to change before November 25, 2026. If you want help wiring STOP replies into your CRM without losing track of which ads bring in your jobs, Call us+1 (415) 420-4059 or start with our free marketing audit.